TAPPING SLEEVES
Stainless tapping sleeve with full circumferential seal and integrated threaded fasteners
Nominal Sizes
4 - 24 inches
Working Pressure
4" - 8": up to 250 psi; 10" - 24": up to 200 psi
Pipe Compatibility
Steel, cast iron, asbestos cement, plastic and other types of pipe
Fabricated steel tapping sleeve with drop-in bolts
Nominal Sizes
4 - 24 inches
Working Pressure
up to 175 psi
Pipe Compatibility
Steel, ductile iron and plastic pipe
Fabricated steel tapping sleeve. Used to make a branch outlet on concrete steel cylinder pipe.
Nominal Sizes
Available for all sizes of concrete cylinder pipe
Working Pressure
See submittal
Pipe Compatibility
Concrete steel cylinder pipe
Stainless steel tapping sleeve with full circumferential seal, triangular side-bars and drop-in bolts.
Nominal Sizes
4 - 30 inches
Working Pressure
4" - 8": up to 250 psi; 10" - 24": up to 200 psi; 26" - 30": up to 150 psi
Pipe Compatibility
Steel, cast iron, asbestos cement, plastic and other types of pipe
Fabricated steel tapping sleeve with triangular side bars
Nominal Sizes
6 - 48 inches, larger sizes available upon request
Working Pressure
6" - 12": up to 250 psi; 14" - 42": up to 150 psi; 48" and larger: up to 100 psi. See submittal for detail
Pipe Compatibility
Steel, cast iron and other types of pipe
Fabricated steel weld-on tapping outlet
Nominal Sizes
6 - 96 inches, larger sizes available upon request
Working Pressure
Up to 175 psi.
Pipe Compatibility
Steel pipe
Heavy duty stainless steel tapping sleeve
Nominal Sizes
6 - 48 inches, larger sizes available upon request
Working Pressure
6" - 12": up to 250 psi; 14" - 42": up to 150 psi; 48" and larger: up to 100 psi. For higher pressures, contact your representative.
Pipe Compatibility
Steel, cast iron, and other types of pipe
Fabricated steel tapping sleeve with side and end gasket seals. Used to make a branch outlet from a main supply line with extra protection for lines subjected to excessive beam loads.
Nominal Sizes
12 - 96 inches
Working Pressure
See submittal
Pipe Compatibility
Steel, cast iron, asbestos cement, plastic and other types of pipe
tapping sleeves for HDPE pipe
Stainless steel tapping sleeve with full circumferential seal
Nominal Sizes
4 - 12 inches
Working Pressure
Up to 150 psi.
Pipe Compatibility
For use on HDPE pipe with a minimum wall thickness of SDR17
Fabricated steel tapping sleeve with drop-in bolts
Nominal Sizes
4 - 24 inches
Working Pressure
Up to 150 psi.
Pipe Compatibility
For use on HDPE pipe with a minimum wall thickness of SDR17
LINE STOPPING SLEEVE
Stainless steel line stop sleeve
Nominal Sizes
4 - 12 inches
Working Pressure
4" - 8" up to 250 psi; 10" - 12" up to 200 psi
Pipe Compatibility
Compatible with most line stopping equipment